Add Warmth to Your Home With a Fireplace Wall Mount

A fireplace wall mount can bring warmth and ambiance any room, whether in your home, office or commercial space. These wall mounts are typically easy to set up and include mounting brackets for either hanging or recessing into a wall.

For a simple and quick installation, follow the guidelines on the manufacturer's site. Verify that the wall-mounting bracket and the bottom of the fireplace fit together, and then attach it to the wall.

Size

A wall-mounted electric fireplace can add an amazing centerpiece to a room, creating ambiance and warmth. They are available in various sizes that can be customized to fit any space. A smaller model is perfect for bedrooms, whereas larger models can be put in a living or family room. Certain models have an option to install recessed units against the wall, creating a seamless appearance.

The height of the fireplace wall mount can also influence the way it appears within the room. Many people mount them higher up on the wall to create a dramatic effect. They are usually 6 to 12 inches above the floor. Some prefer to place the TVs at a standard height of 4.5-5 feet. This lets them be seen by most seats in the room.

No matter what size you decide to go with, there are some important things to be aware of to ensure that your fireplace is safe and effective. For instance, you should ensure that all combustible items are kept at a minimum of three feet away from the fire, including drapes and furnishings. In addition, you should make sure that the mounting brackets are securely attached to the studs, if possible. If you cannot find studs you can use anchors made of plastic. This will ensure that the fireplace will not be pulled out.

Another crucial aspect to take into consideration when choosing a fireplace wall mount is the amount of heat that it generates. A good rule of thumb is to select a model that produces about the same amount of heat as an typical electric heater for your home. Using this guideline you can be sure that your new fireplace will provide sufficient supplemental heating for the entire room.

Certain fireplaces feature distinct features that distinguish them from the competition. Certain fireplaces have remote control and adjustable settings for brightness, and a no-heat mode. They also have cool-to touch glass and realistic LED flames. Other important features include a built-in shelf for holding electronics, and an easy installation procedure that doesn't require any professional assistance.

Installation

Unlike a built-in electric fire that requires hard-wiring into the electrical system of your home, the fireplace wall mount is semi-permanent. It can be mounted directly on the wall or into a bracket that is then fixed to the wall. It is crucial to select an area that is close enough to an electrical outlet to allow the power cord to reach, while allowing enough space to other objects in line with what the manufacturer recommends in the manual for your owner.

Plug it in and play with the LED lights and settings prior to when you start the installation. This will let you know whether it is ready for installation or if it requires to be checked further.

Then, you need to plan the area where you intend to install the fireplace wall mount. Based on the model, you may require a bump-out on the wall. You may also prefer to cover the existing wall with drywall. In the latter case, use proper drywall methods like mudding and tape. Allow it to completely dry before you can continue.

After the walls have been made, attach the brackets to the wall with screws. These brackets should be fixed to the studs which are behind the drywall. This will stop the fireplace from slipping away from the wall later.

After the bracket has been secured, it is time to mount the fireplace itself. The design of the fireplace can differ however, there will always be a ledge at the point where the fireplace sits and a place to connect it to brackets on top. Then, you can place any additional media such as stones, embers, or logs within the fireplace.

Some models allow you to attach the firebox and the screen together on the wall bracket. This can make the installation even simpler, but it is important to ensure that everything is fitted properly and is secure prior to the final step.

Once the fireplace is placed it is possible to complete the design by screwing or tacking the bracket to the wall and trimming any wires that aren't needed. You can also consider using paintable wire covers to camouflage the power cord, if you want.

Safety

A fireplace wall mount is a great way to heat your home without taking up valuable floor space. However, it is important to take safety precautions when using this type of fireplace. To prevent electric shock the first step is to make sure that the fireplace is grounded. Make sure you read the instructions provided by the manufacturer to ensure the proper use.

Although it is possible to find wall-mounted electric fires that don't produce heat, most of them will feature a form of heater to increase the realism and ambiance of the flame effects. It is usually an element of heating powered by a fan that blows air over the heating element. Certain models also feature an infrared heat source.

When the fireplace is installed, you should be careful not to touch the hot surface, since this could cause burns and damage to the appliance. To reduce the risk of fire, keep combustibles at least three feet from the fireplace. Be careful not to block vents at the rear of the unit.

There are additional security features to consider when selecting the wall mount for your electric fireplace. For example, you should ensure that the fireplace has an emergency shut-off switch to prevent overheating and fires. It's also a good idea to choose a unit with a lower output of heat as it will help save energy.

The material used to surround is also crucial. You should select an option that is safe for children and pets, such as steel, glass, or wood veneers. You should also choose a model that has a display or remote control to make it easier to operate.

There are many types of wall-mounted fireplaces, including electric and ethanol. The right one for you will depend on your budget and the style of your home. You can be certain to bring warmth and class to your home, regardless of whether you choose an electric or ethanol fireplace. You should always adhere to the safety guidelines provided by the manufacturer. You should also ensure that your pets and family secure when using this fireplace.

Style

The style of a fireplace wall mount determines the appearance it will have on the walls of your home. Certain models are designed to stand out, and others blend in with the decor of your room. For instance, a contemporary model like the Streamlined wall-mount electric fireplace features an elegant front glass face and a minimalist design. It has top venting to allow heated air to circulate seamlessly while preserving the fireplace's elegant design. Its flat mounting and easy-to use remote make it simple to operate.

You can also find electric fireplaces for wall installation with more traditional looking mantels. These are great for homes with open hearths or for those who want to convert a fireplace that burns wood into an electric fireplace without chimney. These flat-wall fire places come in different sizes and include an area to display your decorations. They're a great option for bedrooms, living rooms and home offices.

A gas wall-mount fireplace is a good option for those who want to add a warm, inviting vibe to their space. These units have the traditional log set and are available in several different frame styles that include natural stone and black. These units also have a customizable LED flame color as well as an ember bed for a personalized appearance. Certain models have a TV mount built in to provide additional functionality.

Certain models can be positioned directly on the wall while others are designed to be fully recessed into a wall. For example the Allusion wall-mount gas fireplace comes in a shallow footprint that permits it to be recessed into 2x6-framed walls, however, you can include a trim skirt to cover the exposed portion of the fireplace. The Allusion also comes with a handy remote control and multiple heat settings, so you can use your fireplace year-round.

Surface-mounted electric fireplaces typically project from 4" to 6.5" into the room, which makes them more straightforward to install than fireplaces that are built into the wall or constructed from a wall cavity. They're also an excellent choice for tenants who don't want endure the hassle of drilling holes into their walls. If you move, you can easily remove or reposition your fireplace.